Shop

Description

4S Feed Block Elevator
Fastens to T-posts or fence posts. Easy to install. MADE IN THE USA!
Holds most standard size feed blocks up to 50lbs. *Posts not included*

Sold in Single’s & 4 Packs (Free Shipping on 4-Packs)

hunting-made-in-usa

Extends the life of feed blocks:

Elevates your feed blocks to keep them off the ground
Keeping hogs, raccoons and other non-target animals from getting to your feed blocks
PRO-TIP:

If pests & non-target animals are a problem in your area, a 4″ PVC pipe 3.5′-4′ long can be placed around the T-post.
T-post Installation: *Posts not included*

Install a T-post to proper depth (based on target animal).
Press elevator onto T-post.
Use a rubber mallet to lightly tap 4S Elevator in the center of the base until firmly in place.
Insert pegs, twist to lock, adjust as needed to hold your block in place.
Pegs can be moved in towards the center as the block gets smaller.
Fence Post Installation: *Posts & lag bolts not included*

Turn base upside down.
Drill pilot hole at least 1/4″ to 5/16″ through the “T” receiver.
Place base face up onto fence post.
Fasten with a 5″ to 6″ lag bolt.
Do not over-tighten.
Insert feeder pegs and block.
Pegs can adjust to secure any size block.
**lag bolts not included**